2020-05-11, 04:38 AM
I didn’t want to pollute the other thread about SDR AIS in case this is just my system issue or my understanding
I am using OP2 and the SDR AIS module 2.0.1 beta.
In the last couple of days I have tried to calibrate the dVB stock to work with AIS but do not find a channel:
So I ran the calibration tool see the start in the pic below:
![[Image: 174730a1d0add820cbcb71155d2744ee.jpg]](https://uploads.tapatalk-cdn.com/20200511/174730a1d0add820cbcb71155d2744ee.jpg)
and it stabilizes in the low numbers then every so often there is a large variation:
![[Image: e198057128ad170db22891ee0940f256.jpg]](https://uploads.tapatalk-cdn.com/20200511/e198057128ad170db22891ee0940f256.jpg)
After this it stabilizes out at a number near zero. After that though, if I use this number I still can not find a channel on the GSM-850 band
![[Image: 7a94b061270bec9f4319afbcced404e7.jpg]](https://uploads.tapatalk-cdn.com/20200511/7a94b061270bec9f4319afbcced404e7.jpg)
Does anyone see anything wrong with what I am doing?
I am using OP2 and the SDR AIS module 2.0.1 beta.
In the last couple of days I have tried to calibrate the dVB stock to work with AIS but do not find a channel:
So I ran the calibration tool see the start in the pic below:
![[Image: 174730a1d0add820cbcb71155d2744ee.jpg]](https://uploads.tapatalk-cdn.com/20200511/174730a1d0add820cbcb71155d2744ee.jpg)
and it stabilizes in the low numbers then every so often there is a large variation:
![[Image: e198057128ad170db22891ee0940f256.jpg]](https://uploads.tapatalk-cdn.com/20200511/e198057128ad170db22891ee0940f256.jpg)
After this it stabilizes out at a number near zero. After that though, if I use this number I still can not find a channel on the GSM-850 band
![[Image: 7a94b061270bec9f4319afbcced404e7.jpg]](https://uploads.tapatalk-cdn.com/20200511/7a94b061270bec9f4319afbcced404e7.jpg)
Does anyone see anything wrong with what I am doing?