2020-08-27, 09:13 PM
Thomas,
Has the new stable Pi update been released yet that fixes the firmware issue?
jamieFL
Has the new stable Pi update been released yet that fixes the firmware issue?
jamieFL
Server Hardware for openplotter?
|
2020-08-27, 09:13 PM
Thomas,
Has the new stable Pi update been released yet that fixes the firmware issue? jamieFL
2020-09-08, 06:57 PM
My extensive wishlist for a boat computer card:
The wishlist is inspired by MCC board (https://github.com/Thomas-GeDaD/openplot...de_MCS.pdf), as well as CarPiHat, number of SupTronics boards, Moitessier Hat, PiJuice, SixFab boards,.
See also: https://bareboat-necessities.github.io/m...hlist.html Thanks, MG
Download BBN Marine OS for raspberry pi
https://bareboat-necessities.github.io/m...at-os.html Video of actual installation: https://www.youtube.com/watch?v=3zMjUs2X3qU
2020-09-10, 07:59 AM
2020-09-11, 09:30 PM
An update to my issue regarding stlk-fail:
Due to HW failure I changed from a ST6000+ to a ST6001+, still same problem when connecting the MCS board, Seatalk fail is displayed. After adding a pull-up of 100k on the digital input everything works fine! Now I am hoping for any kind of advice on how to get the ST1 output available
Jeanneau Sun Odyssey 42.2 - All Openplottered and hooked up on online.
Ciao Thomas, I tried to configure your new Plugin but it gives me an error ... but I ask do I need it? It's already set up all right from your card ... sorry but SK for me is a nice puzzle ...
You see: https://i.imgur.com/ioCxLSZ.png https://i.imgur.com/pT8g2JD.png Update Oops! I just saw your comment in the other forum ... so alright! https://www.segeln-forum.de/board194-boo...ost2200959
2020-09-22, 01:16 PM
Here you find informations of the updatet 1.5 board...:
https://www.gedad.de/2020/09/20/gedad-mc...te-to-1-5/ Key facts: Already available: • Easy-to-use all-round adapter board for Marine application • Combines different interfaces • Usable with Raspberry Pi 3,4 • Large inpu tvoltage range(8-28V) • Integrated 5V Power adapter • Autoshutdown for power down the Pi and shutdown the board • 6x NMEA0183® compatible interfaces (configurable as input or output) • 1x NMEA2000® compatible interface • 1x 1-Wire® interface with real 1-Wire® standard • 1x 5V tolerant I²C® interface • 4x digital Inputs • Ready to use open source app for OpenPlotter Whats New?: • SignalK Intigration • Sealtalk1 reading • Frequenz measurement (through In1-In4) for RPM / Frequenz (Terminal W of the Alternator or Sensor) (at the moment only intigrated in Openplotter) Whats planed?: • I/O board with 8 Inputs (8-28V) and 8 Outputs (8-28V / 500mA) • Analog Input board with 4 Inputs. For measure Voltage 12V, measure Shunt diff Voltage and measure Sensor Inputs (0-300Ohm) => It is possible to wire 4 of this boards to the MCS • Compass and Sensor board
2020-09-24, 04:47 PM
May be add relays for nav/running/anchor lights?
With an API. Thanks, —MG
Download BBN Marine OS for raspberry pi
https://bareboat-necessities.github.io/m...at-os.html Video of actual installation: https://www.youtube.com/watch?v=3zMjUs2X3qU
2020-09-24, 05:08 PM
Hi,
I worked on it. But I do this directly in SignalK... Further the Same for the I/O Boards... :-) See here... : https://github.com/Thomas-GeDaD/SignalK_...te-IN1-In4
2020-09-24, 06:29 PM
If Possible please add Seatalk1 Write
thx G |
« Next Oldest | Next Newest »
|