Posts: 68
Threads: 8
Joined: May 2017
Reputation:
0
2017-08-03, 05:57 PM
(This post was last modified: 2017-08-07, 01:44 PM by Sailoog.)
Help! - turned on the pi this afternoon and was prompted to upgrade to alpha 14
Did so, and now the openplotter app ( anchor icon) wont run.
The anchor splash screen appears briefly, then nothing
Reboot says there is another upgrade available 14.1, but how do i run that without openplotter?
Steve
Posts: 2,885
Threads: 59
Joined: Mar 2016
Reputation:
277
open a terminal, type openplotter and copy here the error
Posts: 4
Threads: 0
Joined: Aug 2017
Reputation:
0
I have also just updated (30min ago) and the same problem:
pi@openplotter:~ $ openplotter
Traceback (most recent call last):
File "/home/pi/.config/openplotter/openplotter", line 3503, in <module>
MainFrame().Show()
File "/home/pi/.config/openplotter/openplotter", line 267, in __init__
self.read_i2c()
File "/home/pi/.config/openplotter/openplotter", line 1873, in read_i2c
self.list_i2c.Append([str©, name, address, magn_list[c], iii[0], str(iii[1]), str(iii[2])])
UnboundLocalError: local variable 'magn_list' referenced before assignment
btw. i think it would be great if you could give pointers to your build system, so people could help with the development. E.g. i see the repositories for openplotter on github, but does not know where the code on my raspberry is etc. So it is hard to debug myself & help at the moment. Thanks for the great software!
Posts: 68
Threads: 8
Joined: May 2017
Reputation:
0
Traceback (most recent call last):
File "/home/pi/.config/openplotter/openplotter", line 3519, in <module>
MainFrame().Show()
File "/home/pi/.config/openplotter/openplotter", line 267, in __init__
self.read_i2c()
File "/home/pi/.config/openplotter/openplotter", line 1889, in read_i2c
self.list_i2c.Append([str©, name, address, magn_list[c], iii[0], str(iii[1]), str(iii[2])])
IndexError: list index out of range
Posts: 799
Threads: 46
Joined: Jun 2017
Reputation:
25
2017-08-03, 06:52 PM
(This post was last modified: 2017-08-03, 06:52 PM by jim321.)
i try to update from remote desktop it starts then disconnects when i log back in it is still 0.13.1
Posts: 68
Threads: 8
Joined: May 2017
Reputation:
0
one additional thing i have noticed, my imu is no longer showing up correctly in node-red dashboard
is this an i2c problem?
steve
Posts: 68
Threads: 8
Joined: May 2017
Reputation:
0
Thanks Sailoog, Openplotter now running
took a quick look at the imu config, COOL !
steve
Posts: 799
Threads: 46
Joined: Jun 2017
Reputation:
25
2017-08-03, 07:02 PM
(This post was last modified: 2017-08-03, 07:07 PM by jim321.)
that looks sweet
i need a new imu now they sent me a QMC5883 i was trying to adapt that with an arduino ..
thanks
jim