2017-08-06, 12:00 AM
[SOLVED] Upgraded to 14 - no openplotter!
|
2017-08-06, 06:18 PM
(2017-08-05, 07:45 PM)Littlechay Wrote: Any idea when this would be fixed. I'm leaving on a trip soon and would like to use this version. Otherwise I'll have to roll back to a previous version if I can - how do you perform a roll-back. It is already fixed, update to 0.14.3 please. We have not provided a roll-back option on development stage. Yes, there is a n increase of processing due to the improved IMU management but we will try to improve that too.
2017-08-06, 06:19 PM
(2017-08-05, 08:53 PM)Sjoerd02 Wrote:(2017-08-03, 06:40 PM)Sailoog Wrote: open a terminal, type openplotter and copy here the error Go to Raspberry Pi Configuration->Interfaces->1-Wire and enable it, then reboot and all should work.
2017-08-06, 06:21 PM
2017-08-06, 06:23 PM
If not more issues are reported about I2C and IMU management I will mark this post as solved. Sorry for the last multiples updates. Lesson learned.
2017-08-06, 09:48 PM
Will try 14.3 in the morning uk time, ive removed the imu at the moment though to focus on testing nmea2000 integration this week on Amita
Steve
2017-08-07, 08:54 AM
(2017-08-06, 06:18 PM)Sailoog Wrote:(2017-08-05, 07:45 PM)Littlechay Wrote: Any idea when this would be fixed. I'm leaving on a trip soon and would like to use this version. Otherwise I'll have to roll back to a previous version if I can - how do you perform a roll-back. Thanks all up and running OK. I have noticed the the shared wifi access point (shared with a usb wifi adapter which is connected to the net) has dropped several times today. Never did it before. The access point (wan0 the Pi's built in one) just seems to cease to transmit. The carrier is gone everything but no sign of any error on the Pi. Rebooting brings everything back up .. I have just un-shared within OP and shared again so will see if that solves it. Thanks
2017-08-07, 01:43 PM
OK, I will mark this post as solved, please open new posts for issues not related to this one.
2017-08-15, 12:32 PM
Have just updated to 14.x on my rpi 3 and 2 and in both cases I cannot start op anymore, have done also the reforced update in cmd and get folowing message.+
pi@op010:~ $ openplotter Traceback (most recent call last): File "/home/pi/.config/openplotter/openplotter", line 3503, in <module> MainFrame().Show() File "/home/pi/.config/openplotter/openplotter", line 267, in __init__ self.read_i2c() File "/home/pi/.config/openplotter/openplotter", line 1873, in read_i2c self.list_i2c.Append([str©, name, address, magn_list[c], iii[0], str(iii[1]), str(iii[2])]) UnboundLocalError: local variable 'magn_list' referenced before assignment What to do now? Do I need to start with a fresh image or is there just some config file to get amended?
2017-08-15, 01:53 PM
|
« Next Oldest | Next Newest »
|
Users browsing this thread: 5 Guest(s)