2023-07-21, 11:18 PM
My RasPi 3, running bullseye and OpenPlotter v3.x alpha with a Pican-M Canbus is not showing any connection activity in SignalK. The data is available by running candump can0 in terminal, but the deltas/second within SignalK is always zero. Have reconfigured everything a couple times now and am at a loss for how to proceed.
Openplotter-signalK-installer version 3.1.16
Node version - v16.20.1
SignalK version -2.0.0
DaisY USB AIS is functioning and available over the signalK server, and the usb GPS as well. But none of the nmea2000 instruments and gps are available, despite being connected when I check candumb can0.
SignalK connection settings
Data type: NMEA2000
Enabled: Yes
Logging: No
ID: can0
NMEA 2000 Source: Canbus (canboatjs)
Interface: can0
Use Can NAME in source data: Yes
Filters: No
Source Priorities Settings: None
Openplotter-signalK-installer version 3.1.16
Node version - v16.20.1
SignalK version -2.0.0
DaisY USB AIS is functioning and available over the signalK server, and the usb GPS as well. But none of the nmea2000 instruments and gps are available, despite being connected when I check candumb can0.
SignalK connection settings
Data type: NMEA2000
Enabled: Yes
Logging: No
ID: can0
NMEA 2000 Source: Canbus (canboatjs)
Interface: can0
Use Can NAME in source data: Yes
Filters: No
Source Priorities Settings: None