2024-03-22, 01:47 AM
(2024-03-21, 06:32 PM)Sully Wrote: Do you think if I connected the 12V SW in the CAN socket (which is externally identical) I would have fried the raspi?
Interesting thought. I assumed that the CAN driver can withstand 12V as the recommended ESD protection diodes have a working voltage of 24V. And the datasheet of the MCP2562 lists +/- 58V as absolute maximum on the CANH/CANL pins.
But I will have to try that on a sacrificial MacArthur prototype.