2024-04-12, 07:49 PM
Trying to control battery voltage with an ADS1115, (I have OP2 version), Found this problem:
To avoid measuring signals higher than the Vin. (5V in my case), I installed a voltage divider, and really is measuring 3,3V aprox.
The problem is that se output in SignalK is "null". But is OK if we ask "raw data"
Can anybody aid me to solve this problem?
Many thanks!
To avoid measuring signals higher than the Vin. (5V in my case), I installed a voltage divider, and really is measuring 3,3V aprox.
The problem is that se output in SignalK is "null". But is OK if we ask "raw data"
Can anybody aid me to solve this problem?
Many thanks!