2024-05-18, 10:32 AM
Firmware:
RPi4 4Giga
SK 2.7.2
IP 0.25.0
Hello,
ST1-interface generates path "navigation.trip" for SignalK, value being in meters.
InstrumentPanel shows this value, but only in meters.
Is there a way in the InstrumentPanel to change the unit value of "navigation.trip" to nautical miles.
with best regards to you all,
tjm
RPi4 4Giga
SK 2.7.2
IP 0.25.0
Hello,
ST1-interface generates path "navigation.trip" for SignalK, value being in meters.
InstrumentPanel shows this value, but only in meters.
Is there a way in the InstrumentPanel to change the unit value of "navigation.trip" to nautical miles.
with best regards to you all,
tjm