Posts: 18
Threads: 1
Joined: Jun 2018
Reputation:
0
Sorry, can not connect, wrong password again. I changed to my passwort already before. Now I set on the standard 12345678 again and tried after saving. It is shown in the warning that I use the standard WIFI passwort, but cannot connect with it.
Posts: 799
Threads: 46
Joined: Jun 2017
Reputation:
25
2018-07-08, 01:15 PM
(This post was last modified: 2018-07-08, 01:27 PM by jim321.)
try this from terminal
ifconfig
post results from uap0 and wlan0
Posts: 18
Threads: 1
Joined: Jun 2018
Reputation:
0
uap0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.10.10.1 netmask 255.255.255.0 broadcast 10.10.10.255
inet6 fe80::ba27:ebff:fe7f:f949 prefixlen 64 scopeid 0x20<link>
ether b8:27:eb:7f:f9:49 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 335 bytes 26680 (26.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether b8:27:eb:7f:f9:49 txqueuelen 1000 (Ethernet)
RX packets 9 bytes 1270 (1.2 KiB)
RX errors 0 dropped 1 overruns 0 frame 0
TX packets 27 bytes 4270 (4.1 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
pi@openplotter:~ $
Posts: 799
Threads: 46
Joined: Jun 2017
Reputation:
25
that looks ok.
it should work..
i have a 3b and not a 3+ so cant test any further.
Posts: 341
Threads: 0
Joined: Apr 2016
Reputation:
23
You choose a network configuration for the 3B but you have a 3B+ why???
Choose one of the three configurations for 3B+!
Posts: 18
Threads: 1
Joined: Jun 2018
Reputation:
0
2018-07-08, 08:54 PM
(This post was last modified: 2018-07-08, 09:27 PM by Serge.)
Sorry, because I do not know that there is a difference in the configuration. I just tried to follow the documentation but was not sucessful. Which are the configurations for 3B+ or where can I find them?
Ok, found in the drop down, do not notice that it means the 3B+, only 3+. I´m on the WIFI openplotter now, but still do not get the client connected to the PI. Get an failure that the server is not connected to internet for the test.
Posts: 18
Threads: 1
Joined: Jun 2018
Reputation:
0
So, bin jetzt mit dem AP verbunden und auch im vnc hat alles funktioniert.
Danke für Eure Hilfe!
Serge
Posts: 18
Threads: 1
Joined: Jun 2018
Reputation:
0
So I will continue. Connection of my Multiplexer was easy under Seriell. GPS and AIS-Data running now in OpenCPN.
The thing I want to do now is to bring the wifi stick working. Are there some instructions under openplotter I can follow? I have simple TP-Link Mini Wireless USB Adapter.