2018-06-22, 10:24 AM
Not sure if this is by design or?
pi 3B.
OP 1.0.2
Alfa AWUSo51NH and Alfa Tube_U (N). Both fail PPTP VPN
Network config as
RPi3: AP + client + bridge eth0
Sharing internet device is wlan0
br0 is 10.10.10.1/24
wlan0: is associated with source AP *******
wlan0: Configured 192.168.38.201/24
IPsec VPN connects from client tablet via Open plotter
PPTP VPN fails to connect from client tablet via Open Plotter.
Both the above authenticate when tablet connects directly to Source AP.
Third party VPN services such as "Turbo VPN" (tablet app) connect OK
Any pointers please, as PPTP is, for me, an important requirement.
Thanks
pi 3B.
OP 1.0.2
Alfa AWUSo51NH and Alfa Tube_U (N). Both fail PPTP VPN
Network config as
RPi3: AP + client + bridge eth0
Sharing internet device is wlan0
br0 is 10.10.10.1/24
wlan0: is associated with source AP *******
wlan0: Configured 192.168.38.201/24
IPsec VPN connects from client tablet via Open plotter
PPTP VPN fails to connect from client tablet via Open Plotter.
Both the above authenticate when tablet connects directly to Source AP.
Third party VPN services such as "Turbo VPN" (tablet app) connect OK
Any pointers please, as PPTP is, for me, an important requirement.
Thanks