This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Latch Maximum Rudder Position
#1
It seems it would be valuable to latch the Maximum-Rudder-Deflection (Port and Starboard) achieved into Pypilot statistics-panel.

Also make it resetable.

This can be used to adjust AP servo-gains; providing a feedback mechanism of effectiveness.
Reply
#2
I am not sure what you mean "latch" but the maximum rudder deflection angle can be set by the user already.

It is possible to make the autopilot more accurately move the rudder at the right speed (calibrate speed from command vs current draw), as well as automatically set the gain as you say based on the rudder feedback if it exists. Also possible to have an autopilot that commands the rudder in absolute position.

All of this is planned for the near future to play with, and it does as you say get a better starting guess for the gains.

Still the type of boat and desired steering will ultimately determine the gain setting.
Reply
#3
(2019-09-20, 02:12 AM)seandepagnier Wrote: I am not sure what you mean "latch" but the maximum rudder deflection angle can be set by the user already.

It is possible to make the autopilot more accurately move the rudder at the right speed (calibrate speed from command vs current draw), as well as automatically set the gain as you say based on the rudder feedback if it exists.  Also possible to have an autopilot that commands the rudder in absolute position.

All of this is planned for the near future to play with, and it does as you say get a better starting guess for the gains.

Still the type of boat and desired steering will ultimately determine the gain setting.

Latch is to grab and hold onto; like sample/hold, then store in signalK node, as say: ap.rudder.maximum.port and .starboard.

Example: if one is reaching/hitting maximum rudder deflection angle(already available) quite regularly (very inefficient), this will indicate that condition; and mechanical tiller adjustments might be necessary and/or response rates/gains will need to be corrected to mitigate operating in "near-rudder-stall" conditions

Will also enunciate unbalanced linkage, friction-points and movement not obviously noticeable; showing up as  +18/-13 vs +18/-18.

Just a thought
Reply
#4
What about an enhancement to the dashboard rudder display which allows a time-lapse of rudder positions in different colors over the past minute or so?

Also could plot the rudder deflection on one axis, and how often on another axis for the past few minutes, it might be interesting to look at.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)