2020-01-04, 11:07 AM
(This post was last modified: 2020-01-04, 12:02 PM by SkipperEarly.)
1. When trying to install drivers same chipset but different countryidentifyer (and possible cap spelling) is not recognized:
Checking for a wifi module to determine the driver to install.
Your wifi module is unrecognised.
**** Unable to identify your wifi module ****
The script only works for wifi modules using the rtl8188eu, rtl8188fu, rtl8192eu, rtl8812au, 8822bu, mt7610 and mt7612 drivers.
Looking for your wifi module the script detected the following USB devices:-
Bus 001 Device 006: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS]
Comment: I know RTL8188CUS driver gives troubble in ad hoc mode but works perfect as AP.
PS made further testst with RTL8188ETV and RTL8192CU but also fail to recognize/load drivers. (running out of dongles now )
2. When changing the AP mac address and press apply, the AP settings SSID and Password are reset to defaults. - should be kept from last user settings.
3. when APPLY is pushed the system informs that reboot is required, would be nice to make a (delayed / cancelable) reboot automatically (similar to the solution in the moitessier hat settings)
Checking for a wifi module to determine the driver to install.
Your wifi module is unrecognised.
**** Unable to identify your wifi module ****
The script only works for wifi modules using the rtl8188eu, rtl8188fu, rtl8192eu, rtl8812au, 8822bu, mt7610 and mt7612 drivers.
Looking for your wifi module the script detected the following USB devices:-
Bus 001 Device 006: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS]
Comment: I know RTL8188CUS driver gives troubble in ad hoc mode but works perfect as AP.
PS made further testst with RTL8188ETV and RTL8192CU but also fail to recognize/load drivers. (running out of dongles now )
2. When changing the AP mac address and press apply, the AP settings SSID and Password are reset to defaults. - should be kept from last user settings.
3. when APPLY is pushed the system informs that reboot is required, would be nice to make a (delayed / cancelable) reboot automatically (similar to the solution in the moitessier hat settings)