2022-05-18, 10:22 PM
Sorry i dont understand your answer. It is just a quote
Remote LCD Nokia5510/JLX12864 with ESP32
|
2022-05-18, 10:22 PM
Sorry i dont understand your answer. It is just a quote
Thank you for the .bin file. now it works !!!!
connected with my tinypilot!! The problem now are the buttons. When i press the buttons on the ttgo they are not shown in the "lcd and remote controll setup" webpage to assign them to actions. How do i enable the tinypilot to recognize the buttons ? Also i see that you use the touch gpio's on the ttgo. Do i have to wire a switch or can i use them as touch inputs? Could it be these errors on the console? Code: rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
2022-05-20, 02:32 AM
the buttons are defined in gpio_esp32.py Check this. Some have pull ups, some have pull downs, others expect external resistors.
I am not exactly sure which issue There is no way to assign them through the webpage, because, the esp32 remote does not require the pypilot_hat service to be active so it does not handle them. It also does not run a web server on the esp32. The wifi remote talks directly to pypilot, and the buttons are just assigned directly for the 10 actions supported: AUTO, MENU, SMALL_PORT, SMALL_STARBOARD, SELECT, BIG_PORT, BIG_STARBOARD, TACK, NUDGE_PORT, NUDGE_STARBOARD
2022-05-20, 06:31 AM
Ok i understand what's going on ! Now it's play time.
Thank you very much Sean !
2022-05-20, 06:45 PM
I added support for touchpads in the esp32 remote. I opened a pull request in github if my changes are welcomed !
I am not a professional so sorry if i have some mistakes. I tested it and it works. Next i want to order the 2.4 inch ttgo to give it a try. It would be nicer a bigger screen Thank you very much for your help Sean.
2022-05-21, 01:46 AM
(This post was last modified: 2022-05-21, 01:47 AM by seandepagnier.)
the bigger screen may have external ram
Yes actually it has. But it has three times the price and it is out of stock everywhere
https://banggood.onelink.me/zMT7/8b7oyu8y
2022-05-21, 01:22 PM
the price was $17 a 2 years ago, then $30 last year. It seems $50 now, better buy some, in a few years they will be $800.
2023-10-10, 03:58 PM
May I ask if you have followed up on the project? Is there a stable running version of the ESP32 client?
Did you use a jlx1286 display? I get the following error message when I set the lcd driver to "jlx12864" (same error with "nokia5110"): lcd driver jlx12864 True False Traceback (most recent call last): File "boot.py", line 14, in <module> File "lcd_esp32.py", line 41, in <module> File "lcd.py", line 115, in __init__ AttributeError: 'module' object has no attribute 'spiscreen' MicroPython v1.14-4-g5de2fa392 on 2021-06-08; ESP32 module with ESP32 |
« Next Oldest | Next Newest »
|