This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SDR Play devices
#11
(2022-12-31, 10:13 PM)DroZDi Wrote: pi@openplotter:~/work $ AIS-catcher -l
AIS-catcher (build Dec 30 2022) v0.42
© Copyright 2021-2022 jvde-github and other contributors
This is free software; see the source for copying conditions.There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Found 2 device(s):
0: Realtek, RTL2838UHIDIR, SN: VHF00001
1: SDRPLAY, RSP1, SN: B0001P0003

I just replaced rtl_ais with AIS-Catcher running on a Nooelec RTL-SDR v5 SDR on RPi 4. With rtl_ais I can't see any ships/boats from my home. WIth AIS-Catcher and same settings for gain and hardware AGC it works much better and I can receive a lot of AIS signals from different ships/boats/Ferries on river Havel in Berlin Spandau. Exactly same position of the antenna.
I changed the setup.py to support AIS-Catcher so SDR VHF works as usal and I can switch between AIS and DAB or set parameters like ppm or gain.
But I tested only on RTL-SDR. I do not own a SDRPLAY.
Reply
#12
You can also try to use AIS filter as in https://forum.openmarine.net/showthread.php?tid=5006
Correct config for SDR Play is inĀ https://forum.openmarine.net/showthread.php?tid=4559
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)