(2020-01-25, 12:55 PM)PaddyB Wrote: Might be worth giving the KIP dashboard a go, much better IMHO. Though it still doesn't have conversion from M^3 to L. Signalk works in SI units, then the apps do any conversion afterwards - https://en.wikipedia.org/wiki/Internatio...m_of_Units
The sigK instrument panel has some options, inc temperature, KIP has more >
The KIP author is on here now and again, maybe he'll see this an add M^3=>L conversion
Cool, I'll give KIP a try, would be a nice feature to have a custom conversion tool for any of the units? I'm happy with the SI units in most cases, but occasionally, a more human readable version is nice for people who are just using the display occasionally and not sure what, for example m3 is, as not a common unit of measurement in everyday life.
Just tried KIP and adding a numeric value, checking the units list, there are units for flow rate in the GUI L/min and so on, but doesn't appear to be just volume units showing up. Am I missing something?
(2020-01-25, 12:25 PM)jim321 Wrote: i used nod red to change values and sent those to the node red dash
kelvin to c - 273.15
1 m3 = 1000 liter
I'll try Node Red, was trying to keep everything in the GUI as much as possible, so if someone else looked at it when I wasn't available, they wouldn't need to know node red if they needed to troubleshoot. Thanks for your help