2020-06-05, 03:05 AM
Hi,
So tonight I setup ESP Easy as per Leif's values/exemple : typed in exactly the same stuff as per the various pictures, to the letter!
In SignalK's Plugin config, I setup "Signal K - MQTT Gateway" :
- Checked "Active"
- Checked "Run local server (publish...)"
- Put 1883 as Local server port
Nothing shows up in SignalK server/Data Browser. When I look in ESP Easy's log tool, I get a temperature reading and the following message :
1700005: DS : Temperature: 23.00 (28-81-34-f0-1b-19-1-a2)
1700059: MQTT : Intentional reconnect
1701119: MQTT : Broker C005 connection failed (1440/0)
Obviously the ESP isn't connecting to the Pi. Any ideas why? Aside the 3 things I did to configure the "SignalK-MQTT Gateway" plugin, do I need to do something else in SignalK or ESP Easy?
Thanks!
So tonight I setup ESP Easy as per Leif's values/exemple : typed in exactly the same stuff as per the various pictures, to the letter!
In SignalK's Plugin config, I setup "Signal K - MQTT Gateway" :
- Checked "Active"
- Checked "Run local server (publish...)"
- Put 1883 as Local server port
Nothing shows up in SignalK server/Data Browser. When I look in ESP Easy's log tool, I get a temperature reading and the following message :
1700005: DS : Temperature: 23.00 (28-81-34-f0-1b-19-1-a2)
1700059: MQTT : Intentional reconnect
1701119: MQTT : Broker C005 connection failed (1440/0)
Obviously the ESP isn't connecting to the Pi. Any ideas why? Aside the 3 things I did to configure the "SignalK-MQTT Gateway" plugin, do I need to do something else in SignalK or ESP Easy?
Thanks!