2021-04-16, 06:31 AM
(2021-04-16, 02:44 AM)seandepagnier Wrote: You cannot use /dev/ttyS0, must use /dev/ttyAMA0 by disabling bluetooth in boot.conf
Thanks. You are right. I changed that back and forth to see the difference and then got confused and forgot it wasn't disabled. So now I got that working.
Now I get this in the GUI and this in the console. Am I on the right track? It still doesn't seem to detect the motor controller. I have checked and triple-checked that the serial connctions go to the right headers on the Pi, by the use of my multi-instrument.
One thing is that I am getting confused over the talk of Arduinos and their LEDs in the motor controller. Obviously there is no discrete Arduino unit in your current controller, so should I still expect the same blinking?