2021-08-07, 12:50 PM
(This post was last modified: 2021-08-07, 12:53 PM by baltika_no_9.)
(2021-08-06, 10:16 PM)zorrua Wrote: Hello,That device looks like it's TTL rather than "true" RS232. I have a feeling that's your issue.
I buy this device: https://es.aliexpress.com/item/400102738...Title=true
The GPS is working great wheh connecting to VHF radio. But when I connect to the USB converter, I have no data in OpenPlotter.
I do a "tail -f /dev/ttyXXX" and there are some not-readable data. it look like is not well formated.
I try different baud rates, but nothing. Need I by other device?
Someone could help with this?
Best regards.
Apart from having different operating voltage levels, the 0 and 1 are different between TTL (lower voltage =0) and RS232 (higher voltage =0).
You can buy RS232<>TTL level shifters but it's just another link in the chain. A USB to true RS232 cable like the one I use should work fine.