2021-09-05, 08:34 AM
The autopilot always engages the clutch before manual movement command or when engaged. When in standby the clutch is released after any manual command. The pump is normally powered from the motor drive wires which reverse with direction and only powered during movement.
So to override this, it really depends on your setup, but you would either have to disengage the autopilot, or you could add an emergency switch to override the clutch and break this circuit. I am not really sure I understand exactly what is needed or if it is not already possible.
So to override this, it really depends on your setup, but you would either have to disengage the autopilot, or you could add an emergency switch to override the clutch and break this circuit. I am not really sure I understand exactly what is needed or if it is not already possible.