This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.
OpenMarine › Pypilot › General discussion v
Pypilot for Dummies -The Uninitiated

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Linear Mode
Pypilot for Dummies -The Uninitiated
SVHM Offline
Member
***
Posts: 60
Threads: 12
Joined: Jun 2020
Reputation: 1
#14
2021-09-09, 10:19 PM
The display came on. I moved it accidentally whil the program was still running. I hope that wasn't bad. The output in terminal was as follows:

sudo pypilot_hat nokia5110
have gpio for raspberry pi
no lirc available
have gpio for raspberry pi
failed to load /proc/device-tree/hat/custom_0 : [Errno 2] No such file or directory: '/proc/device-tree/hat/custom_0'
assuming original 26 pin tinypilot
loading config file: /root/.pypilot/hat.conf
config failed: [Errno 2] No such file or directory: '/root/.pypilot/hat.conf'
Using driver nokia5110
no languages 'NullTranslations' object has no attribute 'ugettext'
No hat config, arduino not found
failed to configure buzzer 'bool' object is not subscriptable
connected
store grey /root/.pypilot/ugfxfonts/016078b
store grey /root/.pypilot/ugfxfonts/016047b
store grey /root/.pypilot/ugfxfonts/016065b
store grey /root/.pypilot/ugfxfonts/024078b
store grey /root/.pypilot/ugfxfonts/024047b
store grey /root/.pypilot/ugfxfonts/024065b
store grey /root/.pypilot/ugfxfonts/016115b
store grey /root/.pypilot/ugfxfonts/016116b
store grey /root/.pypilot/ugfxfonts/016097b
store grey /root/.pypilot/ugfxfonts/016110b
store grey /root/.pypilot/ugfxfonts/016100b
store grey /root/.pypilot/ugfxfonts/016098b
store grey /root/.pypilot/ugfxfonts/016121b
store grey /root/.pypilot/ugfxfonts/012115b
store grey /root/.pypilot/ugfxfonts/012116b
store grey /root/.pypilot/ugfxfonts/012097b
store grey /root/.pypilot/ugfxfonts/012110b
store grey /root/.pypilot/ugfxfonts/012100b
store grey /root/.pypilot/ugfxfonts/012098b
store grey /root/.pypilot/ugfxfonts/012121b
store grey /root/.pypilot/ugfxfonts/016067b
store grey /root/.pypilot/ugfxfonts/014067b
store grey /root/.pypilot/ugfxfonts/016087b
store grey /root/.pypilot/ugfxfonts/016073b
store grey /root/.pypilot/ugfxfonts/016070b
store grey /root/.pypilot/ugfxfonts/010087b
store grey /root/.pypilot/ugfxfonts/010073b
store grey /root/.pypilot/ugfxfonts/010070b
store grey /root/.pypilot/ugfxfonts/016032b
store grey /root/.pypilot/ugfxfonts/016082b
store grey /root/.pypilot/ugfxfonts/016071b
store grey /root/.pypilot/ugfxfonts/016111b
store grey /root/.pypilot/ugfxfonts/016109b
store grey /root/.pypilot/ugfxfonts/016114b
store grey /root/.pypilot/ugfxfonts/016099b
store grey /root/.pypilot/ugfxfonts/016108b
store grey /root/.pypilot/ugfxfonts/016101b
store grey /root/.pypilot/ugfxfonts/009087b
store grey /root/.pypilot/ugfxfonts/009065b
store grey /root/.pypilot/ugfxfonts/009082b
store grey /root/.pypilot/ugfxfonts/009078b
store grey /root/.pypilot/ugfxfonts/009073b
store grey /root/.pypilot/ugfxfonts/009071b
store grey /root/.pypilot/ugfxfonts/009110b
store grey /root/.pypilot/ugfxfonts/009111b
store grey /root/.pypilot/ugfxfonts/009032b
store grey /root/.pypilot/ugfxfonts/009109b
store grey /root/.pypilot/ugfxfonts/009116b
store grey /root/.pypilot/ugfxfonts/009114b
store grey /root/.pypilot/ugfxfonts/009099b
store grey /root/.pypilot/ugfxfonts/009108b
store grey /root/.pypilot/ugfxfonts/009101b
store grey /root/.pypilot/ugfxfonts/034032bc
store grey /root/.pypilot/ugfxfonts/034053bc
failed to run web server: [Errno 98] Address already in use: ('0.0.0.0', 33333)
failed to run web server: [Errno 98] Address already in use: ('0.0.0.0', 33333)
Traceback (most recent call last):
File "/usr/local/bin/pypilot_hat", line 11, in <module>
load_entry_point('pypilot==0.16', 'console_scripts', 'pypilot_hat')()
File "/usr/local/lib/python3.7/dist-packages/pypilot-0.16-py3.7-linux-armv7l.egg/pypilot/hat/hat.py", line 335, in main
hat.poll()
File "/usr/local/lib/python3.7/dist-packages/pypilot-0.16-py3.7-linux-armv7l.egg/pypilot/hat/hat.py", line 299, in poll
i.poll()
File "/usr/local/lib/python3.7/dist-packages/pypilot-0.16-py3.7-linux-armv7l.egg/pypilot/hat/hat.py", line 134, in poll
msg = self.keyspipe.recv()
File "/usr/local/lib/python3.7/dist-packages/pypilot-0.16-py3.7-linux-armv7l.egg/pypilot/pipeserver.py", line 37, in recv
return self.pipe.recv()
File "/usr/lib/python3.7/multiprocessing/connection.py", line 250, in recv
buf = self._recv_bytes()
File "/usr/lib/python3.7/multiprocessing/connection.py", line 407, in _recv_bytes
buf = self._recv(4)
File "/usr/lib/python3.7/multiprocessing/connection.py", line 383, in _recv
raise EOFError
EOFError
cleanup web process None
pid kill 20319
Error in atexit._run_exitfuncs:
Traceback (most recent call last):
File "/usr/local/lib/python3.7/dist-packages/pypilot-0.16-py3.7-linux-armv7l.egg/pypilot/hat/hat.py", line 106, in <lambda>
atexit.register(lambda : cleanup(None)) # get backtrace
File "/usr/local/lib/python3.7/dist-packages/pypilot-0.16-py3.7-linux-armv7l.egg/pypilot/hat/hat.py", line 100, in cleanup
os.kill(self.process.pid, signal.SIGTERM) # get backtrace
ProcessLookupError: [Errno 3] No such process



The command pypilot_hat makes the gui and I get:

sudo pypilot_hat
have gpio for raspberry pi
no lirc available
have gpio for raspberry pi
failed to load /proc/device-tree/hat/custom_0 : [Errno 2] No such file or directory: '/proc/device-tree/hat/custom_0'
assuming original 26 pin tinypilot
loading config file: /root/.pypilot/hat.conf
config failed: [Errno 2] No such file or directory: '/root/.pypilot/hat.conf'
Using driver default
using glut
no languages 'NullTranslations' object has no attribute 'ugettext'
No hat config, arduino not found
failed to configure buzzer 'bool' object is not subscriptable
connected
store grey /root/.pypilot/ugfxfonts/016078b
store grey /root/.pypilot/ugfxfonts/016047b
store grey /root/.pypilot/ugfxfonts/016065b
store grey /root/.pypilot/ugfxfonts/024078b
store grey /root/.pypilot/ugfxfonts/024047b
store grey /root/.pypilot/ugfxfonts/024065b
store grey /root/.pypilot/ugfxfonts/016115b
store grey /root/.pypilot/ugfxfonts/016116b
store grey /root/.pypilot/ugfxfonts/016097b
store grey /root/.pypilot/ugfxfonts/016110b
store grey /root/.pypilot/ugfxfonts/016100b
store grey /root/.pypilot/ugfxfonts/016098b
store grey /root/.pypilot/ugfxfonts/016121b
store grey /root/.pypilot/ugfxfonts/012115b
store grey /root/.pypilot/ugfxfonts/012116b
store grey /root/.pypilot/ugfxfonts/012097b
store grey /root/.pypilot/ugfxfonts/012110b
store grey /root/.pypilot/ugfxfonts/012100b
store grey /root/.pypilot/ugfxfonts/012098b
store grey /root/.pypilot/ugfxfonts/012121b
store grey /root/.pypilot/ugfxfonts/016067b
store grey /root/.pypilot/ugfxfonts/014067b
store grey /root/.pypilot/ugfxfonts/016087b
store grey /root/.pypilot/ugfxfonts/016073b
store grey /root/.pypilot/ugfxfonts/016070b
store grey /root/.pypilot/ugfxfonts/010087b
store grey /root/.pypilot/ugfxfonts/010073b
store grey /root/.pypilot/ugfxfonts/010070b
store grey /root/.pypilot/ugfxfonts/016032b
store grey /root/.pypilot/ugfxfonts/016082b
store grey /root/.pypilot/ugfxfonts/016071b
store grey /root/.pypilot/ugfxfonts/016111b
store grey /root/.pypilot/ugfxfonts/016109b
store grey /root/.pypilot/ugfxfonts/016114b
store grey /root/.pypilot/ugfxfonts/016099b
store grey /root/.pypilot/ugfxfonts/016108b
store grey /root/.pypilot/ugfxfonts/016101b
store grey /root/.pypilot/ugfxfonts/009087b
store grey /root/.pypilot/ugfxfonts/009065b
store grey /root/.pypilot/ugfxfonts/009082b
store grey /root/.pypilot/ugfxfonts/009078b
store grey /root/.pypilot/ugfxfonts/009073b
store grey /root/.pypilot/ugfxfonts/009071b
store grey /root/.pypilot/ugfxfonts/009110b
store grey /root/.pypilot/ugfxfonts/009111b
store grey /root/.pypilot/ugfxfonts/009032b
store grey /root/.pypilot/ugfxfonts/009109b
store grey /root/.pypilot/ugfxfonts/009116b
store grey /root/.pypilot/ugfxfonts/009114b
store grey /root/.pypilot/ugfxfonts/009099b
store grey /root/.pypilot/ugfxfonts/009108b
store grey /root/.pypilot/ugfxfonts/009101b
store grey /root/.pypilot/ugfxfonts/034032bc
store grey /root/.pypilot/ugfxfonts/034053bc
store grey /root/.pypilot/ugfxfonts/034057bc
failed to run web server: [Errno 98] Address already in use: ('0.0.0.0', 33333)
failed to run web server: [Errno 98] Address already in use: ('0.0.0.0', 33333)
failed to run web server: [Errno 98] Address already in use: ('0.0.0.0', 33333)
failed to run web server: [Errno 98] Address already in use: ('0.0.0.0', 33333)
failed to run web server: [Errno 98] Address already in use: ('0.0.0.0', 33333)
failed to run web server: [Errno 98] Address already in use: ('0.0.0.0', 33333)
failed to run web server: [Errno 98] Address already in use: ('0.0.0.0', 33333)
store grey /root/.pypilot/ugfxfonts/034054bc
store grey /root/.pypilot/ugfxfonts/034056bc
failed to run web server: [Errno 98] Address already in use: ('0.0.0.0', 33333)
failed to run web server: [Errno 98] Address already in use: ('0.0.0.0', 33333)
store grey /root/.pypilot/ugfxfonts/034050bc
store grey /root/.pypilot/ugfxfonts/034048bc
failed to run web server: [Errno 98] Address already in use: ('0.0.0.0', 33333)
failed to run web server: [Errno 98] Address already in use: ('0.0.0.0', 33333)
failed to run web server: [Errno 98] Address already in use: ('0.0.0.0', 33333)
pi@openplotter:~ $ failed to run web server: [Errno 98] Address already in use: ('0.0.0.0', 33333)
Find
Reply


Messages In This Thread
RE: Pypilot for Dummies -The Uninitiated - by SVHM - 2021-09-09, 10:19 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)