(2021-11-12, 05:16 PM)PaddyB Wrote: Not sure openplotter will run on a Pi zero?
But..... splash out on a Pi zero 2 - loads faster and still very low power draw. I had a zero running for a while running headless with just the raspberry pi software, no openplotter and installed signalk which worked but it was running maxed out at 100% most of the time. You could try just installing signalk if you want to persevere with the zero you have, might be OK without influx database & app running -
https://github.com/SignalK/signalk-serve...llation.md
hhmm, I naively thought that a slower CPU just means slower command execution... or are the 512k RAM the problem? But then a pi zero 2 would have the same problem.
Michael
(2021-11-13, 06:56 PM)MatsA Wrote: Hi ! As Paddy indicates I think its wise to just install Signal K manually without OpenPlotter. Instructions here https://github.com/SignalK/signalk-serve...llation.md
But please note that Nodejs can NOT be installed via "apt". I wrote some hints at the end of this post https://pysselilivet.blogspot.com/2021/0...berry.html that maybe helps ?
/Mats
thanks both for the suggestion -- I'll try to follow your hint...
Best, Michael