2022-06-15, 03:42 PM
the resistance to use is 0.01 ohms. You may have to buy a current measuring shunt resistor. The high power controllers use .0005 ohms (500 micro ohms) with an amplifier.
Which schematic are you looking at?
the 560 ohm or 2.4k resistor is part of a lowpass filter (with 0.1uF cap) See:
https://pypilot.org/schematics/wp_controller.pdf
Which schematic are you looking at?
the 560 ohm or 2.4k resistor is part of a lowpass filter (with 0.1uF cap) See:
https://pypilot.org/schematics/wp_controller.pdf