2022-07-09, 09:42 AM
(2022-07-08, 09:54 PM)affinite Wrote: Is it just a case of putting "nmea0183" in the input event for the radio ?
I tried it but I dont see the data when I look at the SK Log for that event, (next test is to connect a serial test device to see if there is actual data on the serial port (even if not on the SK log)
or do I need to route it using the "Forward and filter NMEA to NMEA" plugin ?
Here's how I do it >> On the gps connection set an input event called gps-nmea.
Then I use a usb/serial which inputs wind data as an output for gps data which gets sent out on pin 3 of the wind serial/usb at 4800baud