2022-09-23, 12:34 AM
(This post was last modified: 2022-09-23, 12:36 AM by seandepagnier.)
of course not. It is not working at all and the compass will give erratic readings. It appears that it did calibrate in the past but the calibration somehow got reset or failed to store... this is a bit strange
you can see the calibration values are all 0 and it even prints 'insufficient data'
you have "calibration locked" checked. With this, it cannot update the calibration.
you can see the calibration values are all 0 and it even prints 'insufficient data'
you have "calibration locked" checked. With this, it cannot update the calibration.