2022-09-26, 02:27 PM
Hi,
I bought a Maiana unit some time ago. I chose the simplest version with a little usb breakout board.
When I first set up the Maiana that was with the included break-out board. I created the connection and approved it. No problem.
Since then I have bought the Maiana n2k interface and now SignalK doesn't recognise the new interface.
When I then try to set up a new serial connection via the serial app it fails because there is another (working) serial-usb interface on another usb port with exactly the same name and vendor id.
The conflicting device is my newly installed can-to-usb interface from hatlabs.fi
Any suggestions how to solve this?
I tested to use "port" instead og "dev" in the serial settings. That made me complete the serial settings and create a SignalK connection but it wont let me approve it.
The Maiana unit was programmed using the original breakout board and is functional, both send and receive. It’s just that I can’t get into the unit via the Maiana app anymore.
Cheers,
P
I bought a Maiana unit some time ago. I chose the simplest version with a little usb breakout board.
When I first set up the Maiana that was with the included break-out board. I created the connection and approved it. No problem.
Since then I have bought the Maiana n2k interface and now SignalK doesn't recognise the new interface.
When I then try to set up a new serial connection via the serial app it fails because there is another (working) serial-usb interface on another usb port with exactly the same name and vendor id.
The conflicting device is my newly installed can-to-usb interface from hatlabs.fi
Any suggestions how to solve this?
I tested to use "port" instead og "dev" in the serial settings. That made me complete the serial settings and create a SignalK connection but it wont let me approve it.
The Maiana unit was programmed using the original breakout board and is functional, both send and receive. It’s just that I can’t get into the unit via the Maiana app anymore.
Cheers,
P