2022-11-28, 07:10 PM
Quote:To debug your problem with BME680/688 sensor open a terminal, type openplotter-i2c and set your sensors from scratch, put here any error you get in the terminal. If your sensor is not in the list it will not work.
I tried several times, but it doesn't work. Here are the mistakes obtained when I edited "inside temperature" :
Quote:pi@openplotter:~ $ openplotter-i2c
(openplotter-i2c:2729): Gtk-WARNING **: 18:45:34.881: Negative content height -9 (allocation 1, extents 5x5) while allocating gadget (node entry, owner GtkEntry)
(openplotter-i2c:2729): Gtk-CRITICAL **: 18:46:12.389: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkScrollbar
(openplotter-i2c:2729): Gtk-CRITICAL **: 18:46:12.454: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkScrollbar
(openplotter-i2c:2729): Gtk-CRITICAL **: 18:46:12.493: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkScrollbar
(openplotter-i2c:2729): Gtk-CRITICAL **: 18:46:12.522: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkScrollbar
(openplotter-i2c:2729): Gtk-CRITICAL **: 18:46:12.555: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkScrollbar
(openplotter-i2c:2729): Gtk-CRITICAL **: 18:46:12.589: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkScrollbar
(openplotter-i2c:2729): Gtk-CRITICAL **: 18:46:22.199: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkScrollbar
(openplotter-i2c:2729): Gtk-CRITICAL **: 18:46:22.267: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkScrollbar