Motor Controller Not Found

[Gennady]

if you see "bind_failed"   it means another instance of pypilot is running.

First verify the serial port:
ls -l /dev/serial0

it should point to /dev/ttyAMA0

Next stop pypilot:
sudo service pypilot stop


Now try running on the console pypilot_servo, and check the results.    You may need to add /dev/ttyAMA0 to the list of serial ports pypilot can use.

Sean, you write: "You may need to add /dev/ttyAMA0 to the list of serial ports pypilot can use". How does one do it?