2023-05-16, 03:01 PM
Finally figure it out. I needed to internally configure the Actisense NGT-1 USB to send the PGNs back to the NMEA 2000/SeaTalkNG network. The folks at Actisense were very nice and helpful.
Signalk-to-nmea2000 ver 2.13.0
|
« Next Oldest | Next Newest »
|
Messages In This Thread |
Signalk-to-nmea2000 ver 2.13.0 - by Celestine - 2021-08-17, 06:32 PM
RE: Signalk-to-nmea2000 ver 2.13.0 - by Slovak - 2021-08-19, 09:50 PM
RE: Signalk-to-nmea2000 ver 2.13.0 - by Celestine - 2021-08-20, 07:26 AM
RE: Signalk-to-nmea2000 ver 2.13.0 - by Max1947 - 2021-08-20, 08:43 PM
RE: Signalk-to-nmea2000 ver 2.13.0 - by shinken - 2023-05-12, 02:08 PM
RE: Signalk-to-nmea2000 ver 2.13.0 - by shinken - 2023-05-12, 06:29 PM
RE: Signalk-to-nmea2000 ver 2.13.0 - by holgerw - 2023-05-12, 06:39 PM
RE: Signalk-to-nmea2000 ver 2.13.0 - by shinken - 2023-05-12, 07:36 PM
RE: Signalk-to-nmea2000 ver 2.13.0 - by holgerw - 2023-05-12, 08:08 PM
RE: Signalk-to-nmea2000 ver 2.13.0 - by shinken - 2023-05-12, 08:28 PM
RE: Signalk-to-nmea2000 ver 2.13.0 - by shinken - 2023-05-16, 03:01 PM
|