Serial device not added correctly

[baltika_no_9]

Hi

Well your GPS is a u-blox 8, I only have a u-blox 7 but I just tried to install it.

To compare to your installation here is what I see:

Code:

Hardware    : BCM2835
Revision    : a020d3
Serial        : 00000000a70f867a
Model        : Raspberry Pi 3 Model B Plus Rev 1.3

chris@bobby:~ $ lsusb
Bus 001 Device 006: ID 1546:01a7 U-Blox AG [u-blox 7]

chris@bobby:~ $ dmesg | grep blox
[    5.499801] usb 1-1.1.3: Product: u-blox 7 - GPS/GNSS Receiver
[    5.499822] usb 1-1.1.3: Manufacturer: u-blox AG - www.u-blox.comom

chris@bobby:~ $ apt list udev
Listing... Done
udev/oldstable 247.3-7+deb11u2 arm64 [upgradable from: 247.3-7]
udev/oldstable 247.3-7+deb11u2 armhf

After installing the Serial port and assigning an alias, the symbolic link is created:

chris@bobby:~ $ ls -ahl /dev/ | grep ttyO
lrwxrwxrwx   1 root root           7 Jun 15 20:45 ttyOP_ublox -> ttyACM0

During Openplotter system check I see:
Checking serial connections alias... | All your serial connections have an assigned alias

 I didn't get any errors and I can see the data in Signal K


Please see screenshots - what do your screens show?