2023-07-02, 09:16 PM
(This post was last modified: 2023-07-02, 09:22 PM by Bronno Mulder.)
I made the connection of the GPS receiver with SignalK and SignalK to OpenCPN with Network/localhost/3000. The GPS connection is visible on the map - that part is working well. After that I connecten Tinypilot with TCP/Output/192.168.14.1/20220 (only output RMC, APB). I don't see any signal on NMEA Debug Window from OpenCPN. And on the Tinypilot I only see the compass connection and gps is not accepted.
The strange situation is that after login in TP, and running tail /var/log/pypilot/current, I saw old information. But NMEA debug was working and at that moment I had a gps connetion on Tinypilot. So I had the impression that the problem was solved. But.... after restart I can't see GPS signal on TP anymore, and not any data in the NMEA Debug Window of OpenCPN anymore. So no NMEA code is send I expect? What is going wrong here.....??? I installed the newest versions of Tinypilot.
If you have any idea, that would be perfect!! Thanks.
The strange situation is that after login in TP, and running tail /var/log/pypilot/current, I saw old information. But NMEA debug was working and at that moment I had a gps connetion on Tinypilot. So I had the impression that the problem was solved. But.... after restart I can't see GPS signal on TP anymore, and not any data in the NMEA Debug Window of OpenCPN anymore. So no NMEA code is send I expect? What is going wrong here.....??? I installed the newest versions of Tinypilot.
If you have any idea, that would be perfect!! Thanks.