2023-07-13, 09:55 PM
(This post was last modified: 2023-07-13, 10:14 PM by baltika_no_9.)
Ah I see!
You plug in your GPS into the OPv3 system and it does not appear in the Serial app is that correct? You plug it directly into a USB port on the pi I assume.
What do you see if you use the commands :
after you plug the GPS in? Assuming it is your u-blox GPS you're using
You plug in your GPS into the OPv3 system and it does not appear in the Serial app is that correct? You plug it directly into a USB port on the pi I assume.
What do you see if you use the commands :
Code:
dmesg | grep ttyACM0 and dmesg | grep blox
after you plug the GPS in? Assuming it is your u-blox GPS you're using