First impression working on opi5+: from hardware perspective for me it is better as I was able to install within the box wifi module AX210NGW + antenas and NVMe disk which from the tests are better perfoamnce in comparison to opi5.
Due to lack of working Armbian image I decided to make first some tests on Ubuntu image. It seems that OPI5+ GPIO layout is different from OPI5 one so for sure what was prepared for opi5 will not work on opi5+...
orangepi@orangepi5plus:~$ gpio readall
+------+-----+----------+--------+---+ PI5 PLUS +---+--------+----------+-----+------+
| GPIO | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | GPIO |
+------+-----+----------+--------+---+----++----+---+--------+----------+-----+------+
| | | 3.3V | | | 1 || 2 | | | 5V | | |
| 16 | 0 | SDA.2 | ALT9 | 1 | 3 || 4 | | | 5V | | |
| 15 | 1 | SCL.2 | ALT9 | 1 | 5 || 6 | | | GND | | |
| 62 | 2 | PWM14 | IN | 1 | 7 || 8 | 1 | ALT10 | GPIO1_A1 | 3 | 33 |
| | | GND | | | 9 || 10 | 1 | ALT10 | GPIO1_A0 | 4 | 32 |
| 36 | 5 | GPIO1_A4 | IN | 0 | 11 || 12 | 1 | IN | GPIO3_A1 | 6 | 97 |
| 39 | 7 | GPIO1_A7 | IN | 1 | 13 || 14 | | | GND | | |
| 40 | 8 | GPIO1_B0 | IN | 1 | 15 || 16 | 1 | IN | GPIO3_B5 | 9 | 109 |
| | | 3.3V | | | 17 || 18 | 0 | IN | GPIO3_B6 | 10 | 110 |
| 42 | 11 | SPI0_TXD | IN | 0 | 19 || 20 | | | GND | | |
| 41 | 12 | SPI0_RXD | IN | 0 | 21 || 22 | 0 | IN | GPIO1_A2 | 13 | 34 |
| 43 | 14 | SPI0_CLK | IN | 0 | 23 || 24 | 1 | IN | SPI0_CS0 | 15 | 44 |
| | | GND | | | 25 || 26 | 1 | IN | SPI0_CS1 | 16 | 45 |
| 47 | 17 | GPIO1_B7 | IN | 1 | 27 || 28 | 1 | IN | GPIO1_B6 | 18 | 46 |
| 63 | 19 | GPIO1_D7 | IN | 1 | 29 || 30 | | | GND | | |
| 96 | 20 | GPIO3_A0 | IN | 1 | 31 || 32 | 0 | IN | GPIO1_A3 | 21 | 35 |
| 114 | 22 | GPIO3_C2 | IN | 0 | 33 || 34 | | | GND | | |
| 98 | 23 | GPIO3_A2 | IN | 1 | 35 || 36 | 0 | IN | GPIO3_A5 | 24 | 101 |
| 113 | 25 | GPIO3_C1 | IN | 0 | 37 || 38 | 0 | IN | GPIO3_A4 | 26 | 100 |
| | | GND | | | 39 || 40 | 1 | IN | GPIO3_A3 | 27 | 99 |
+------+-----+----------+--------+---+----++----+---+--------+----------+-----+------+
| GPIO | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | GPIO |
+------+-----+----------+--------+---+ PI5 PLUS +---+--------+----------+-----+------+
orangepi@orangepi5plus:~$ sudo su -
root@orangepi5plus:~# i2cdetect -y 2
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- 38 -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- 68 -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- 77
another bad news for opi5plus -> adafruit blinka doesn't support new board, I have open new issue to extend board defintion - lets wait the answer....
Due to lack of working Armbian image I decided to make first some tests on Ubuntu image. It seems that OPI5+ GPIO layout is different from OPI5 one so for sure what was prepared for opi5 will not work on opi5+...
orangepi@orangepi5plus:~$ gpio readall
+------+-----+----------+--------+---+ PI5 PLUS +---+--------+----------+-----+------+
| GPIO | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | GPIO |
+------+-----+----------+--------+---+----++----+---+--------+----------+-----+------+
| | | 3.3V | | | 1 || 2 | | | 5V | | |
| 16 | 0 | SDA.2 | ALT9 | 1 | 3 || 4 | | | 5V | | |
| 15 | 1 | SCL.2 | ALT9 | 1 | 5 || 6 | | | GND | | |
| 62 | 2 | PWM14 | IN | 1 | 7 || 8 | 1 | ALT10 | GPIO1_A1 | 3 | 33 |
| | | GND | | | 9 || 10 | 1 | ALT10 | GPIO1_A0 | 4 | 32 |
| 36 | 5 | GPIO1_A4 | IN | 0 | 11 || 12 | 1 | IN | GPIO3_A1 | 6 | 97 |
| 39 | 7 | GPIO1_A7 | IN | 1 | 13 || 14 | | | GND | | |
| 40 | 8 | GPIO1_B0 | IN | 1 | 15 || 16 | 1 | IN | GPIO3_B5 | 9 | 109 |
| | | 3.3V | | | 17 || 18 | 0 | IN | GPIO3_B6 | 10 | 110 |
| 42 | 11 | SPI0_TXD | IN | 0 | 19 || 20 | | | GND | | |
| 41 | 12 | SPI0_RXD | IN | 0 | 21 || 22 | 0 | IN | GPIO1_A2 | 13 | 34 |
| 43 | 14 | SPI0_CLK | IN | 0 | 23 || 24 | 1 | IN | SPI0_CS0 | 15 | 44 |
| | | GND | | | 25 || 26 | 1 | IN | SPI0_CS1 | 16 | 45 |
| 47 | 17 | GPIO1_B7 | IN | 1 | 27 || 28 | 1 | IN | GPIO1_B6 | 18 | 46 |
| 63 | 19 | GPIO1_D7 | IN | 1 | 29 || 30 | | | GND | | |
| 96 | 20 | GPIO3_A0 | IN | 1 | 31 || 32 | 0 | IN | GPIO1_A3 | 21 | 35 |
| 114 | 22 | GPIO3_C2 | IN | 0 | 33 || 34 | | | GND | | |
| 98 | 23 | GPIO3_A2 | IN | 1 | 35 || 36 | 0 | IN | GPIO3_A5 | 24 | 101 |
| 113 | 25 | GPIO3_C1 | IN | 0 | 37 || 38 | 0 | IN | GPIO3_A4 | 26 | 100 |
| | | GND | | | 39 || 40 | 1 | IN | GPIO3_A3 | 27 | 99 |
+------+-----+----------+--------+---+----++----+---+--------+----------+-----+------+
| GPIO | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | GPIO |
+------+-----+----------+--------+---+ PI5 PLUS +---+--------+----------+-----+------+
orangepi@orangepi5plus:~$ sudo su -
root@orangepi5plus:~# i2cdetect -y 2
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- 38 -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- 68 -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- 77
another bad news for opi5plus -> adafruit blinka doesn't support new board, I have open new issue to extend board defintion - lets wait the answer....