2023-09-21, 02:45 PM
(2023-08-30, 02:16 PM)Duncan Wrote: When I go into Navionics and try to 'Pair the Devices' using the name of the AP and IP address (default 10.10.10.1) and port name (default 10110) of the NMEA1083 server, i.e. the signal K nmea1083 server, it doesn't connect. It's greyed out and just won't connect.
Any ideas what I'm missing, or haven't done correctly?
This seems to be a problem with getting Navionics connected to the data server, rather than what data is being served.
If you open OpenCPN on the Pi and go to 'Settings', 'Connections' you should be able to add a TCP connection to it with the same settings as you would for navionics and see if it works there. you can disable the SignalK setting if you have one - use this to test the correct data is coming from the server.
if that works and you see boats and GPS data etc. then your issue is in the AP, connection to the AP, the Tablet, or Navionics