NKE Wi-fi to signalK via UDP

[holgerw]

you could try some diagnostics:

Enable logging in sk for the NKE Logs.
Disable gps if you get gps from the NKE. Two GPS Inputs will make bad things with SK.
I dont see any AIS / NMEA presets in the NKE Manual, maybe it gets an overrun from the AIS Data.

There are some errors in line 4: no CR, Checksum, so you could try to disable the checksum in SK to test this.

Why do you need this NKE, SK could send the UDP Data also hisself.

Try to get the NMEA Data via an cheap Serial-USB Stick.

Good Luck