I bought a 10" touchscreen from https://www.touchtecs.com/
Contact is pauer@sztouchtec.com
Screen Size 10.1"
Display Resolution & Aspect Ratio 1280*800(16:10)
Touch Type Capacitive (Resistive Touch , Non-touch optional)
Contrast Ratio 600:1
Brightness (CD/㎡) 800 nits (Can customized up to 1000 nits)
Viewing Angles (CR =10) 85/85/85/85 (L/R/U/D)
Response Time(Typ.Tr+Tf) 6.5ms
Main I/O Interfaces 1*DC (12-36V)
1*HDMI, Max support 1080P
1*VGA
1*DVI
1*RJ45 Touch Interface (defined as USB), connected with capacitive & resistive Touch
1*Audio
Operating Temperature Wide -20~70℃
Storage Temperature -20~70℃
I added the extra brightness option.
From the supplier: "the high brightness monitor that you bought is the upgrade version (including high brightness & photosenstive function switch key, Industrial Terminal )"
Came with cables and 12v power adapter.
You will need a HDMI to micro-HDMI for the RPi.
Since the RPi and Touchscreen will be powered by the Sailboat 12v battery, I need to make a cable w/switch to replace the 115v Power Supply.
I just need a single 12v because the MacArthur Hat Power Board will take 12v and power the RPi.
If you don't have the MacArthur Hat & Power board, you will need 5v for the RP1 and 12v for the Touchscreen.
It also has VESA mounting holes.
It was not cheap after adding exchange, shipping & customs from China to Canada.
I bought 2 but the project was delayed as I worked on my boat... One of them is still unopened ;-)
I'm pretty sure this is the model:
https://www.touchtecs.com/industrial-tou...-size.html
If you email pauer, mention the sailboat application. I don't get any commission, I'm just trying to reduce the frustrating back-and-forth to communicate.
Contact is pauer@sztouchtec.com
Screen Size 10.1"
Display Resolution & Aspect Ratio 1280*800(16:10)
Touch Type Capacitive (Resistive Touch , Non-touch optional)
Contrast Ratio 600:1
Brightness (CD/㎡) 800 nits (Can customized up to 1000 nits)
Viewing Angles (CR =10) 85/85/85/85 (L/R/U/D)
Response Time(Typ.Tr+Tf) 6.5ms
Main I/O Interfaces 1*DC (12-36V)
1*HDMI, Max support 1080P
1*VGA
1*DVI
1*RJ45 Touch Interface (defined as USB), connected with capacitive & resistive Touch
1*Audio
Operating Temperature Wide -20~70℃
Storage Temperature -20~70℃
I added the extra brightness option.
From the supplier: "the high brightness monitor that you bought is the upgrade version (including high brightness & photosenstive function switch key, Industrial Terminal )"
Came with cables and 12v power adapter.
You will need a HDMI to micro-HDMI for the RPi.
Since the RPi and Touchscreen will be powered by the Sailboat 12v battery, I need to make a cable w/switch to replace the 115v Power Supply.
I just need a single 12v because the MacArthur Hat Power Board will take 12v and power the RPi.
If you don't have the MacArthur Hat & Power board, you will need 5v for the RP1 and 12v for the Touchscreen.
It also has VESA mounting holes.
It was not cheap after adding exchange, shipping & customs from China to Canada.
I bought 2 but the project was delayed as I worked on my boat... One of them is still unopened ;-)
I'm pretty sure this is the model:
https://www.touchtecs.com/industrial-tou...-size.html
If you email pauer, mention the sailboat application. I don't get any commission, I'm just trying to reduce the frustrating back-and-forth to communicate.