2023-12-23, 08:38 PM
Regarding your first message, the pins on the pi are ok but in general there's this principle that the tx on one device should be connected to the rx on the other device, and vice versa. Can you confirm that you crossed them over?
Pypilot on the prompt should always run in user space: pi on openplotter and tc on tinypilot. Only the services should be managed with a sudo. The sv sudo stop I have never seen failing. May be you killed the child process manually and therefor the service errored shutting down.
If you have a pi running on 10 milli amps you have a very rare specimen ;-)
Pypilot on the prompt should always run in user space: pi on openplotter and tc on tinypilot. Only the services should be managed with a sudo. The sv sudo stop I have never seen failing. May be you killed the child process manually and therefor the service errored shutting down.
If you have a pi running on 10 milli amps you have a very rare specimen ;-)