2024-02-01, 08:11 PM
So to be clear, it works with the access point "mars", but the same router with your usual SSID does not work?
the log shows:
2023-04-12_11:00:57.79404 wlan0: probing address 192.168.8.208/24
2023-04-12_11:01:02.68481 wlan0: leased 192.168.8.208 for 43200 seconds
So it did work?? Are you sure it did not connect? Nothing has really changed since the previous image regarding networking except that I added AP+client mode. Does that work? Can you run in AP+client mode and still connect to the AP?
Then can you run "ifconfig" "iwconfig" and "route" and check the output if it connected or not? It seems very strange, there must be some inconsistency. You could let me know your normal SSID and psk? or send by pm or? Maybe a special character doesnt work.
the log shows:
2023-04-12_11:00:57.79404 wlan0: probing address 192.168.8.208/24
2023-04-12_11:01:02.68481 wlan0: leased 192.168.8.208 for 43200 seconds
So it did work?? Are you sure it did not connect? Nothing has really changed since the previous image regarding networking except that I added AP+client mode. Does that work? Can you run in AP+client mode and still connect to the AP?
Then can you run "ifconfig" "iwconfig" and "route" and check the output if it connected or not? It seems very strange, there must be some inconsistency. You could let me know your normal SSID and psk? or send by pm or? Maybe a special character doesnt work.