[SOLVED] UDP input does not work

[kste]

here you are difining an UDP input that will listen to any data in adress 192.168.8.3 and port 10120:

[udp]
name=shipmodul
direction=in
optional=yes
address=192.168.8.3
port=10120

Is 192.168.8.3 the address of your raspberry? is this address fixed in the router?
Try with address "localhost"
Have you set your shipmodul to send data to address 192.168.8.3 and port 10120?

192.168.8.3 is the address of shipmodul
shipmodul is setting in udp broadcast and port 10120
Raspberry address is 192.168.8.101
All other device on the lan receive shipmodul nmea data via UDP

---

if I type openplotter the message is:
> bind failed for udp interface shipmodul: Cannot assign requested address
> Failed to initialize Interface shipmodul
bat now the shipmodul is off (I connect to raspberry in remote) This evening I try with shipmodul on