2024-05-15, 06:49 AM
Hello, I am running a fresh OP4 install on a Raspberry 5 with the MacArthur Hat and an ICM-20948. Packages are updated to the latest (4.0.7 for Pypilot). The IMU seems to be working alright, data in SignalK seems logic and correct.
I am running a headless install and usually connect with Raspberry Connect or VNC.
When I do this, some of the Pypilot graphics don't seem to rendered; specifically the calibration and scope ones. I have no monitor, so I am unable to see if this is due to the headless installation.
I have posted some screengrabs here: https://imgur.com/a/qN5WoPU
Happy to help troubleshooting. Thanks!
I am running a headless install and usually connect with Raspberry Connect or VNC.
When I do this, some of the Pypilot graphics don't seem to rendered; specifically the calibration and scope ones. I have no monitor, so I am unable to see if this is due to the headless installation.
I have posted some screengrabs here: https://imgur.com/a/qN5WoPU
Happy to help troubleshooting. Thanks!