Thanks, just ordered one :-)
In the meantime I have tried two more sensors, unfortunately without success.
Since both sensors come from reputable suppliers, I am now doubting whether it is the sensors or whether I have configured something incorrectly
the first sensor is a
MPU-9250 which is shown at address 68 under I2C.
I set AD0 to 3.3V and changed the address to 69. Unfortunately without success, the sensor is still not recognized.
After that I just tried out a GY91 with MPU9250 and BMP280. The BMP280 works at address 76 and supplies data. The MPU is running at 68 and is not recognized
I use OP4, Raspi5/8Gb, Macarthur Hat
In the meantime I have tried two more sensors, unfortunately without success.
Since both sensors come from reputable suppliers, I am now doubting whether it is the sensors or whether I have configured something incorrectly
the first sensor is a
MPU-9250 which is shown at address 68 under I2C.
I set AD0 to 3.3V and changed the address to 69. Unfortunately without success, the sensor is still not recognized.
After that I just tried out a GY91 with MPU9250 and BMP280. The BMP280 works at address 76 and supplies data. The MPU is running at 68 and is not recognized
I use OP4, Raspi5/8Gb, Macarthur Hat