[SOLVED] AP RPi2

[CVL]

If you have a Pi2 with only one usb wifi stick, you have to change the udev rules.(With two wifi sticks it should work)
You can try:
"pi@openplotter:~ $ nano .config/openplotter/Network/pi3_wlan1_wlan0/udev/rules.d/72-static-name.rules"
change the line:
ACTION=="add", SUBSYSTEM=="net", DRIVERS=="brcmfmac", NAME="wlan1"
to
ACTION=="add", SUBSYSTEM=="ieee80211", KERNEL=="phy0",NAME="wlan1"
In openplotter you have to select RPi3: AP + client
click set
click apply
click yes
reboot
Now you should have your wlan1 as AP (I hope so)

Thank you, e-sailing, for the quick answer. As you said, this is a Pi 2B with just one WiFi-Stick.

I tried to change the udev-rules but no luck, the AP didn't show up. any other ideas?

fair winds
Christian