2018-03-08, 05:14 AM
(This post was last modified: 2018-03-08, 05:18 AM by longjohn119.)
I almost forgot, I came across a no solder kit for the Raspi that includes a 2x16 LCD and a HAT for as Pi that's for IoT applications which is pretty much what Signal K is and shouldn't be too hard to adapt the example code. These aren't real picky about placement and you can adjust the sensitivity so you could even mount the detector in a cabin. (The example output was done in my basement) You'd have to come up with your own enclosure though if you don't have access to a 3D printer
https://shop.switchdoc.com/products/rasp...tector-kit
They also have a lot of stuff for building your own weather station, sensors and I2C hubs that may be of interest and also sell on Amazon Prime but for US only
https://shop.switchdoc.com/products/rasp...tector-kit
They also have a lot of stuff for building your own weather station, sensors and I2C hubs that may be of interest and also sell on Amazon Prime but for US only