2018-04-16, 03:04 PM
(2018-04-16, 10:24 AM)Smartell Wrote: Saqqara,Your hardware is fine if you see the data scroll by. It just isn't keeping the settings.
Like i said, it is good to have an understanding of what it should look like in a working setup with the NASA system, so i wonder if you could take some screenshots of your "USB Manager" and "NMEA 0183" tabs?
If possible could you also give me a hint of how the physical connections are done: The setup i am having has the NASA Clipper tactical wind system with the wired NMEA0183 masttop unit connected to the Sailoog RS422/USB adapter. The output from the NMEA masttop unit is only three cables. V+. NMEA and Earth(=v-) so it is not apparent how to connect this to an RS422 which is balanced. anyway, i hav the green light blinking nicely and the NMEA MWV's visible in the Auto setup so something must be working
BR/M
I haven't had any boat time in weeks but will try to get you specifics some evening this week.
Sent from my Moto G (5) Plus using Tapatalk