2016-05-25, 09:33 AM
Great to have a new op 0.8.0 image - Thanks Sailoog for all your effort!
Just a few observations I made when starting with a new image on my rpi2:
My config needs change of keybord layout in preferences, wlan0 for op10.10.10.1 and wlan1 with fixed IP address.
1. have edited the config.txt file in windows to set wlan0 details and sharing.
2. would be nice to define there also vesselname and MMSI and other op USB settings in config.txt
(Its the easiest way to port personal settings from one system to another - maybe you could enable this in future releases)
3. I wanted to start headless but there is nowhere I could set my fixed IP in the config.txt file, so had to find a HDMI screen. Would be nice to set also the 2nd wlan options in the config.txt file
4. have then booted with a terminal and set my wlan1 details and kb-layout option in menu/preferences.
rebooted with both wlan0 and wlan1 working fine but unfortunately system always come up with "enter password for keyring ..." - entered wlan pw again and system started ok. These entries are however not remembered and need to be entered everytime again on reboot - which makes headless-operation impossible.
In the past (before new img file) this worked fine - did I make any mistakes or forgot to amend some config file entries?
5. Have wlan0 and wlan1 but in the op/wifiAP adresses I see now 4 addresses for each section:
e.g. Multiplexed NMEA 0183:
10.10.10.1:10110
169.254.60.100:10110
192.168.11.110:10110
192.168.11.107:10110
I understand the 1st and 3rd line but where does the 2nd and 4th adress come from?
Thats it for now, will keep testing and thanks again: I am a OP fan
Just a few observations I made when starting with a new image on my rpi2:
My config needs change of keybord layout in preferences, wlan0 for op10.10.10.1 and wlan1 with fixed IP address.
1. have edited the config.txt file in windows to set wlan0 details and sharing.
2. would be nice to define there also vesselname and MMSI and other op USB settings in config.txt
(Its the easiest way to port personal settings from one system to another - maybe you could enable this in future releases)
3. I wanted to start headless but there is nowhere I could set my fixed IP in the config.txt file, so had to find a HDMI screen. Would be nice to set also the 2nd wlan options in the config.txt file
4. have then booted with a terminal and set my wlan1 details and kb-layout option in menu/preferences.
rebooted with both wlan0 and wlan1 working fine but unfortunately system always come up with "enter password for keyring ..." - entered wlan pw again and system started ok. These entries are however not remembered and need to be entered everytime again on reboot - which makes headless-operation impossible.
In the past (before new img file) this worked fine - did I make any mistakes or forgot to amend some config file entries?
5. Have wlan0 and wlan1 but in the op/wifiAP adresses I see now 4 addresses for each section:
e.g. Multiplexed NMEA 0183:
10.10.10.1:10110
169.254.60.100:10110
192.168.11.110:10110
192.168.11.107:10110
I understand the 1st and 3rd line but where does the 2nd and 4th adress come from?
Thats it for now, will keep testing and thanks again: I am a OP fan