2019-01-09, 05:36 PM
Hi Sean,
the rudder feedback is working nicely and the upgrade you made the pilot control panel loocks great.
Two minor problems:
I manage the Rudder-calibration from he Pypilot/Client tab. I dont manage to get it calibrated from
the Pypilot/Calibration/Servo tab. Do I really have to press both buttons for the rudder centered and
than again press both when the rudder is at an angle of e.g. 40 degrees. Anyway how I try I dont get it
calibrated from here.
There is a slider bar to change the setting (degrees) of the autopilot (in compass mone). It works
when the AP is engaged, (Just a little fast for my taste). The problem i see is that when the AP is not engaged (Standbay),
and you move the slider bar ist engages the AP automaticly. I donĀ“t know if this is your intention ?
I think the AP shoul only engage when you press the AP-button.
It is not a big thing and I hope I did not explain to bad
Save sailing
Andreas
the rudder feedback is working nicely and the upgrade you made the pilot control panel loocks great.
Two minor problems:
I manage the Rudder-calibration from he Pypilot/Client tab. I dont manage to get it calibrated from
the Pypilot/Calibration/Servo tab. Do I really have to press both buttons for the rudder centered and
than again press both when the rudder is at an angle of e.g. 40 degrees. Anyway how I try I dont get it
calibrated from here.
There is a slider bar to change the setting (degrees) of the autopilot (in compass mone). It works
when the AP is engaged, (Just a little fast for my taste). The problem i see is that when the AP is not engaged (Standbay),
and you move the slider bar ist engages the AP automaticly. I donĀ“t know if this is your intention ?
I think the AP shoul only engage when you press the AP-button.
It is not a big thing and I hope I did not explain to bad
Save sailing
Andreas