I'm using the Raspberry Pi Sense Hat that was created for the Astro Pi Mission in Space on the International Space Station.
The IMU is LSM9DS1 and is picked up by Pi Pilot for Compass, Pitch, Roll and Yaw etc.
I need help adding the two environmental sensors to I2C for Open CPN. They are LPS25H for Pressure and Temperature at address 0x5c
and HTS221 for Humidity and Temperature at address 0x5f. How do I add these to the drop down for I2C sensors?
I can also use some help getting my analog depth and wind speed/direction added to my Pi.
Thanks, Johnny
Here's the link for the sense hat pinout etc.
https://pinout.xyz/pinout/sense_hat
The IMU is LSM9DS1 and is picked up by Pi Pilot for Compass, Pitch, Roll and Yaw etc.
I need help adding the two environmental sensors to I2C for Open CPN. They are LPS25H for Pressure and Temperature at address 0x5c
and HTS221 for Humidity and Temperature at address 0x5f. How do I add these to the drop down for I2C sensors?
I can also use some help getting my analog depth and wind speed/direction added to my Pi.
Thanks, Johnny
Here's the link for the sense hat pinout etc.
https://pinout.xyz/pinout/sense_hat
Johnny Johnson...I'm a Trumpet player/mechanic..."Trumpmech"
I own a 1978 Ericson 27.
I own a 1978 Ericson 27.