2020-05-19, 03:07 PM
Hi Nicola,
The setup for the can(nmea2000) must be done in the can app of openplotter. There you must setup the mcp2515. Here is a video:
https://m.youtube.com/watch?v=w4nGNWhy_9c
It's in german but beginning at 2:45 you see how to configure the can. There you also see the incoming data with candump.
At the first entry in this thread you find the most instructions.... ;-)
If you need further help, let me know....
The setup for the can(nmea2000) must be done in the can app of openplotter. There you must setup the mcp2515. Here is a video:
https://m.youtube.com/watch?v=w4nGNWhy_9c
It's in german but beginning at 2:45 you see how to configure the can. There you also see the incoming data with candump.
At the first entry in this thread you find the most instructions.... ;-)
If you need further help, let me know....