I have a ST40 and ST6000+ on the same bus from the course computer, and MCS on the other.
Have tried hooking up MCS to the bus of other instruments by splitting the cable but that caused more problems...
It should really have the same potential here on the boat.
Is it as simple as not having the pullup makes the Course computer complain?
From Knaufs reference; "pullup circuit in each device, talker pulls down to 0V (wired OR)"
Have tried hooking up MCS to the bus of other instruments by splitting the cable but that caused more problems...
It should really have the same potential here on the boat.
Is it as simple as not having the pullup makes the Course computer complain?
From Knaufs reference; "pullup circuit in each device, talker pulls down to 0V (wired OR)"
Jeanneau Sun Odyssey 42.2 - All Openplottered and hooked up on online.