2020-12-22, 09:00 PM
(2020-12-21, 06:41 PM)Sailoog Wrote:(2020-12-20, 04:07 PM)niklun Wrote: I'll update. Today I made the new installation from the image openplotter. The one posted on the forum by Saillog. So with the Kernel 5.4.79. The usual I had. Positive surprise, everything works perfectly ..... with the usual errors and warnings of the -dmesg, no changes to that effect but the system works. Therefore, the errors are not hardware. It remains for me to apply the temperature sensor on the 1-wire door. As soon as done I will give new news. If you understand something about mistakes ....
Bye for now, and good wind.
I was about to recommend a fresh start as you did. Your problem sounds like a corrupted kernel and tracking such problems is not worth. If you or someone reports the same problem again we should investigate deeper.
As for Moitessier, I have the same problem as @niklun, see: https://i.imgur.com/L2RmfEd.png
Pi4_2 giga- Moitessier first series