Connect to harbour wifi with ubiquiti bullet m5

[abarrow]

After doing a few Bullets in marinas, I find that setting them up in router mode, and as a DHCP provider, is the most reliable way of doing it. Then anything from the Bullet into rest of the network on the boat is on the same subnet. If you are using a secondary WiFi router, just don't use the router port so everything is bridging. Turn off DHCP on the secondary router, and make sure that secondary router address is set for the same subnet (for example, 192.168.1.xxx) address as the rest of your boat's network.

I hope that made sense!